Digisat Multi RRP $880.00

Digisat Multi is our newest member in the instrument family.

It can measure on up 4 lnb´s at the same time. A new mode called zoom mode, more precise and exact than ever to help you to make very accurate dish installations

·Satellite instrument 950-2150mhz.
·Measure on one or up to four LNBs at the same time.
·Accurate with Normal- & Sensitive- mode.
·High resolution LCD with "backlite"
·Controlls 13/18v, 22 kHz & DiSEqC
·DiSEqC 1.2 (STAB), SatScan, Triax engines.
·"Beeper" and "Maxhold" function.
·Delivered with 8 x AA rechargable batteries.
·Can be powered through the coax cable
·Included power supply & 4 way switch with 4 LED´s
·CE-Approved

DIGISAT Multi is developed in Sweden for exact alignment and adjustment of satellitedishes.

DIGISAT Multi is microprocessor controlled, making it very reliable and accurate.

The instrument is unique as it can measure satellite signal from one and up to four LNBs at the same time.

Signalstrength is presented graphical on the LCD-display in form of thermometerscales

and in numbers (from 0-999). It can also present pitchtones from one of the selected inputs (the higher tone the better signal) on a loudspeaker.

DIGISAT Multi is very sensitive and can detect the weakest of signals. Strong incoming signals (powerfull satellites, big dishes) can easily be attenuated for better

readout.

DIGISAT Multi can be switched from normal to sensitive mode for more accurate alignment of the dish.

This is very useful when a satellite has been found. Simply switch, with a push on a button, to Sensitive mode. This will be of great help for aligning the dish 100%

DIGISAT Multi can control DiSEqC, Toneburst 22 kHz and 13/18v which makes it very useful for setting up and testing systems. The instrument can operate any DiSEqC

1.2 actuator (also NOKIA SatScan and TRIAX H/H).The combination of actuator control and satfinder is very useful and always needed.

DIGISAT Multi DIGISAT Pro Accu is powersupplied either by the replaceble and rechargeable 8xAA batteries or from a reciever (through the coax).The unit is operational for about four hour with a fully charged battery. Charging of

the unit is done with the enclosed powersupply. It takes about 14 hours to recharge a fully drained battery.

The inputs are short-circuit protected by automatic fuses. Even though the DIGISAT Multi has a lot of functions it is still very easy to use and has a very compact design. The unit is delivered in its rubber-carrying case and comes with,

powersupply, a special 4-way DiSEqC-switch with LED´s

Product Flyer <click>

Instruction Manual <click>