Satlook Micro G2
$1600 RRP
Satlook
Micro G2 is a small instrument with functions as match,
satellite identification & the ability to
measure on 2 LNB´s at the same time.
The SATLOOK MICRO G2 is a swedish made SAT-TV
instrument. The unit is made for exact
alignment and
adjustment of satellite-dishes.
It is intended for professional use when high
accuracy and
precise information are needed.
It´s easily operated without a lot of
unnecessary buttons and
knobs. The basic functions are easy to get a
hold on and takes
only minutes to learn.
The instrument is provided with a 3" LCD which
either shows
Sat-signal strength or Digital information.
The SATLOOK MICRO G2 is unique as it can
measure satellite
signal from two LNBs at the same time.
Signalstrength is
presented graphical on the LCD-display in form
of
thermometer-scales. It can present pitchtones
(the higher
tone the better signal) on a loudspeaker.
This second generation of the MICRO, G2, can
also present
the Satellite spectrum, freq: 950-2150 MHz in
different
steps of resolution. This will make it very
easy for the skilled
installer to know what satellite he is
receiving.
Further more the SATLOOK MICRO G2 show Digital
information like BER (bit error rate),
constellation-diagram
(QPSK) and S/N (signal/noise ratio).
The NIT function can identify the various
TV-satellites by
reading out the NIT in the Bitstream (NIT =
Network
Information Table). The NIT also contains info
about the
transponders TV and Radio-channels.
SATLOOK MICRO G2 can store up to 99 positions
of Satellite
transponder information. The instrument can
easily scan
through the memory positions and identify the
various
Satellite transponders.
The polarisation of the LNB is switchable
13V/18V and the
Hi-Lo band with 22 kHz-tone. The DiSEqC-function
controls all
DiSEqC-accessories (like switches, LNB´s and
actuators).
The power of the instrument is supplied by a
built in and
rechargeable battery. Even though the
instrument has a lot
of functions it is still very light and
flexible.
Micro
G2
Input frequency:
920-2150MHz.
Sat-TV min level in:
About
35 dBuV (noise).
Sat-TV max level in:
About
100 dBuV.
Input/output impedance:
75 Ohm,
F-connectors.
Measuring method (analog):
Spectrum analyzer
Signal presentation on LCD -display
in form of thermometer scales.
Pitch-tone, highest tone on loudspeaker.
Measuring method (Digital):
BER
(bit error rate)
S/N (signal/noise-ratio)
Constellation (QPSK)
Max-level:
Thermometer scales showing max.
Maxhold function.
BER, S/N and QPSK showing max.
Satellite-identification:
Yes, by
reading out the NIT in the
bitstream. Info about the TV and
Radio channels.
Memory:
Up to
99 transponders can be
stored with name.
Memory locks on:
FEC,
Symbol-rate Frecuency,
13/18v, 22kHz.
Memory search:
The
instrument scans the memory
positions and presents the
matching transponders.
Presentation:
On LCD
3”
PC-connection:
Yes,
RS232-output
Power out:
Yes,
13-18V.
22 kHz tone:
Yes,
on/off.
DiSEqC:
Yes,
all 1.0 and 1.1. Also
Toneburst on/off.
DiSEqC actuator:
Built
in positioner for DiSEqC 1.2,
SatScan and SatSelect.
Battery:
Rechargable 12v, 3.5amp/hour.
Operational:
About 1
hour on a fully charged
Battery.
Weight:
1.5kg
incl.battery & carrying case.
Accessories:
Nylon
carrying-case.
Power-supply of 230V13.5V,1.7A
Car-charger.
BNC/F-adapter.
Technical specification.
Product Flyer
<click>
Instruction Manual
<click>
 |
| |
• With spectrum.
• Measure on two LNB´s at the same time (920-2150 MHz).
• Very sensitive, easy to maximize weak and strong
signals.
• Readout of NIT –gives Satellite-ID and TV/Radio-channel
info.
• Digital BER and S/N-ratio and constellation diagram (QPSK).
• Stores up to 99 memory positions (for satellite
tranponders).
• Scan through memory positions (transponders) for easy
Sat-ID.
• LNB voltage 13/18v. 22 kHz tone switch.
• Standard DiSEqC according to level (1.0, 1.1, 1.2).
• 3” LCD with very high resolution.
• RS232 for PC-connection and future upgrades.
• Built in, rechargeable battery.
• Only 2 kg complete with carrying-case. |
|
